Sequoia 4WD V8-4.7L (2UZ-FE) (2006)
/Page-455008.png)
a) Hold the camshaft timing pulley with SST, loosen the 4 bolts of the timing pulley.
SST 09960-10010 (09962-01000, 09963-01000)
b) Remove the 2 timing pulleys.
23. REMOVE GENERATOR
24. REMOVE DRIVE BELT TENSIONER
a) Remove the bolt, 2 nuts and belt tensioner.
25. REMOVE CRANKSHAFT PULLEY
a) Using SST, remove the crankshaft pulley.
SST 09950-50013 (09951-05010, 09952-05010, 09953-05010, 09953-05020, 09954-05021)
26. REMOVE NO. 1 TIMING BELT COVER
a) Remove the 4 bolts and timing belt cover.
27. REMOVE TIMING BELT GUIDE
28. REMOVE TIMING BELT COVER SPACER
29. REMOVE TIMING BELT
HINT: If re-using the belt and the installation mark has disappeared from it, place a new installation mark on the timing belt to the match the dot
