Sequoia 4WD V8-4.7L (2UZ-FE) (2006)
VVT Sensor
REMOVAL
1. REMOVE THROTTLE BODY COVER SUB-ASSEMBLY
2. REMOVE INTAKE MANIFOLD
3. REMOVE VVT SENSOR
a. Disconnect the VVT sensor connector.
b. Remove the bolt and VVT sensor with the bolt.
VVT Sensor
REMOVAL
1. REMOVE THROTTLE BODY COVER SUB-ASSEMBLY
2. REMOVE INTAKE MANIFOLD
3. REMOVE VVT SENSOR
a. Disconnect the VVT sensor connector.
b. Remove the bolt and VVT sensor with the bolt.