Sequoia 4WD V8-4.7L (2UZ-FE) (2006)
Tire Pressure Monitor Receiver / Transponder: Service and Repair
Tire Pressure Warning Valve and Transmitter
TIRE PRESSURE WARNING VALVE AND TRANSMITTER
Components
REMOVAL
1. REMOVE FRONT TIRE
2. REMOVE REAR TIRE
3. REMOVE TIRE PRESSURE MONITOR VALVE
a. Remove the valve core and cap, and release air from the tire.
b. After ensuring that air is sufficiently released, remove the nut and washer that are used to fix the tire pressure monitor valve sub assembly and
drop the sensor inside the tire.
HINT: Keep the removed cap, valve core, nut and washer.