Sequoia 4WD V8-4.7L (2UZ-FE) (2006)
/Page-1686001.png)
Trunk Lamp Switch: Testing and Inspection
INSPECTION
1. INSPECT LUGGAGE ROOM LIGHT SWITCH
a. Disconnect the connector from the interior light assembly.
b. Turn the interior light switch ON, check that continuity exists between terminal 2 and body ground.
If continuity is not as specified, replace the light assembly or bulb.
c. Turn the interior light switch to DOOR, check that continuity exists between terminals 1 and 2.
If continuity is not as specified, replace the light assembly or bulb.
