Sequoia 4WD V8-4.7L (2UZ-FE) (2006)
Wheel Fastener: Service and Repair
Front Axle Hub Bolt
FRONT AXLE HUB BOLT
REPLACEMENT
1. REMOVE FRONT WHEEL
2. REMOVE DISC BRAKE CYLINDER ASSEMBLY
a. Remove the bolt and brake line clamp from the steering knuckle.
b. Remove the 2 bolts, brake caliper and disc.
c. Support the brake caliper securely.
3. REMOVE FRONT AXLE HUB BOLT
a. Using SST and a screwdriver or an equivalent, remove the hub bolt.
SST 09650-17011
4. INSTALL FRONT AXLE HUB BOLT
a. Install a washer and nut to a new hub bolt as shown in the illustration.
b. Using a screwdriver or an equivalent to hold, install the hub bolt by torquing the nut.
c. Remove the nut and washer.
5. INSTALL DISC BRAKE CYLINDER ASSEMBLY
a. Install the brake disc, caliper and 2 bolts.
Torque: 123 Nm (1,250 kgf-cm, 90 ft. lbs.)
b. Install the brake line clamp to the steering knuckle with the bolt.
Torque: 28 Nm (285 kgf-cm, 21 ft. lbs.)
6. INSTALL FRONT WHEEL
Torque: 110 Nm (1,150 kgf-cm, 83 ft. lbs.)
7. DEPRESS BRAKE PEDAL SEVERAL TIMES