Sequoia 4WD V8-4.7L (2UZ-FE) (2006)
2. READ VIN (Vehicle Identification Number)
HINT: Below are the VIN reading instructions. Use the procedures and flowchart. Reading the VIN stored in the ECM is necessary when
comparing it to the VIN provided with the vehicle.
a. Read VIN using the intelligent tester.
b. Check the vehicle's VIN.
c. Connect the intelligent tester to the DLC3.
d. Turn the ignition switch ON.
e. Turn the tester ON.
f.
Enter the following menus: DIAGNOSIS / ENHANCED OBD II / VIN.