Sequoia 4WD V8-4.7L (2UZ-FE) (2006)
/Page-646049.png)
7. CHECK MEMORY SEAT ECU AND SWITCH (w/ Driving Position Memory)
a. Disconnect the M6 and M7 ECU connectors.
b. Measure the resistance or voltage of each terminal of the wire harness side connector.
If the result is not as specified, there may be a malfunction on the wire harness side.
8. CHECK A/C ECU (INTEGRATION CONTROL AND PANEL)
a. Disconnect the I19 ECU connector.
b. Measure the resistance or voltage of each terminal of the wire harness side connector.
If the result is not as specified, there may be a malfunction on the wire harness side.
