Sequoia 4WD V8-4.7L (2UZ-FE) (2006)
/Page-766006.png)
a. Install the VSV for the EVAP to the upper intake manifold.
b. Connect the EVAP hose.
c. Connect the VSV connector for the EVAP.
5. INSTALL THROTTLE BODY COVER BRACKET
a. Install the throttle body cover bracket with the bolt.
6. INSTALL FUEL PRESSURE PULSATION DAMPER
7. INSTALL INTAKE AIR CONNECTOR ASSEMBLY
8. INSTALL THROTTLE BODY COVER
