Sequoia 4WD V8-4.7L (2UZ-FE) (2006)
/Page-545002.png)
a. Disconnect the crankshaft position sensor connector.
b. Remove the bolt and crankshaft position sensor.
INSTALLATION
1. INSTALL CRANKSHAFT POSITION SENSOR
a. Install the crankshaft position sensor with the bolt.
Torque: 6.5 N.m (65 kgf.cm, 58 in.lbf)
b. Connect the crankshaft position sensor connector.
2. INSTALL ENGINE UNDER COVER NO.1
