Sequoia 4WD V8-4.7L (2UZ-FE) (2006)
c. Install the occupant classification ECU.
d. Connect the 2 connectors to the occupant classification ECU.
NOTE:
-
If the occupant classification ECU has been dropped, or there are any cracks, dents or other defects in the case or connector, replace it with
a new one.
-
When installing the occupant classification ECU, be careful that the SRS wiring does not interfere with other parts and that it is not
pinched between other parts.
2. INSTALL FRONT SEAT ASSEMBLY (for Manual Seat)
3. INSTALL FRONT SEAT ASSEMBLY (for Power Seat)
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. PERFORM INITIALIZATION
a. Perform initialization.
HINT: Some systems need initialization when disconnecting the cable from the negative battery terminal.
6. INSPECT SRS WARNING LIGHT
a. Inspect the SRS warning light.