Sequoia 4WD V8-4.7L (2UZ-FE) (2006)
Step 9
INSPECTION PROCEDURE
INITIAL INSPECTION
1. INSPECT COMMUTATOR FOR OPEN CIRCUIT
a. Using an ohmmeter, check that there is continuity between the segments of the commutator.
If there is no continuity between any segment, replace the armature.
2. INSPECT COMMUTATOR FOR GROUND
a. Using an ohmmeter, check that there is no continuity between the commutator and armature coil core.
If there is continuity, replace the armature.
3. INSPECT COMMUTATOR FOR DIRTY AND BURNT SURFACE