Sequoia 4WD V8-4.7L (2UZ-FE) (2006)
SST 09950-60010 (09951-00180, 09951-00320, 09952-06010), 09950-70010 (09951-07150)
NOTICE: Make sure to install the oil seal in the correct direction.
d. Coat a new bearing with molybdenum disulfide lithium base grease.
e. Using SST, press in the bearing.
SST 09950-60010 (09951-00340), 09950-70010 (09951-07150)
2. REPLACE BEARING
a. Using SST, press out the bearing.
SST 09950-60010 (09951-00260), 09950-70010 (09951-07150)
b. Using SST, press out the bearing from the rack housing.
SST 09950-60010 (09951-00260), 09950-70010 (09951-07150)
c. Coat a new bearing with molybdenum disulfide lithium base grease.
d. Using SST, press in the bearing.
SST 09950-60010 (09951-00310), 09950-70010 (09951-07150)