Sequoia 4WD V8-4.7L (2UZ-FE) (2006)
/Page-1150001.png)
Control Arm: Service and Repair
Rear Upper Control Arm
REAR UPPER CONTROL ARM
Components
REMOVAL
1. REMOVE REAR WHEEL
Torque: 110 Nm (1,150 kgf-cm, 83 ft. lbs.)
2. SUPPORT REAR AXLE HOUSING WITH JACK
3. REMOVE UPPER CONTROL ARM ASSEMBLY
a. Disconnect the speed sensor wire harness.
b. Remove the bolt and brake line bracket.
