Sequoia 4WD V8-5.7L (3UR-FE) (2009)
Amplifier: Service and Repair
Installation
AUDIO / VIDEO: STEREO COMPONENT AMPLIFIER: INSTALLATION
INSTALLATION
1. INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY
(a) Install the amplifier with the 3 bolts.
Torque: 7.0 Nm (71 kgf-cm, 62 in-lbf)
(b) Connect the 4 connectors.
2. INSTALL AUDIO AMPLIFIER COVER
(a) Set the cover on the stereo amplifier assembly.
(b) Engage the 3 clips.
3. INSTALL FRONT SEAT ASSEMBLY RH
(a) for Manual Seat:
Install the front seat RH See: Body and Frame/Seats/Service and Repair/Front Seat Assembly (for Manual Seat)/Installation.
(b) for Power Seat:
Install the front seat RH See: Body and Frame/Seats/Service and Repair/Front Seat Assembly (for Power Seat)/Installation.
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)