Sequoia 4WD V8-5.7L (3UR-FE) (2009)
Auxiliary Step / Running Board: Service and Repair
Reassembly
EXTERIOR PANELS / TRIM: SIDE STEP: REASSEMBLY
REASSEMBLY
1. INSTALL SIDE STEP BRACKET
(a) Install the side step bracket with the 2 bolts.
Torque: 13 Nm (127 kgf-cm, 9.2 ft-lbf)
2. INSTALL NO. 2 SIDE STEP BRACKET
HINT: Use the same procedure as for the front side
3. INSTALL NO. 3 SIDE STEP BRACKET
HINT: Use the same procedure as for the front side
4. INSTALL STEP COVER REINFORCEMENT
HINT: Use the same procedure as for the front side
5. INSTALL STEP ARM SPACER
(a) Engage the guide and install the step arm spacer.
6. INSTALL STEP COVER PROTECTOR
(a) Engage the guide and install the step cover protector.