toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Doors, Hood and Trunk|Hood > < Components|Page 8514
Page 2
background image

22. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY

HINT:  Use the same procedure as for the LH side  See: Mirrors/Service and Repair/Outer Rear View Mirror/Installation.

23. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY See: Front Door/Service and Repair/Reassembly
24. INSTALL FRONT ARMREST BASE UPPER PANEL See: Front Door/Service and Repair/Reassembly
25. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG See: Front Door/Service and Repair/Reassembly
26. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH See: Front Door/Service and Repair/Reassembly
27. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTE:  When disconnecting the cable, some systems need to be initialized after the cable is reconnected  See: Testing and
Inspection/Programming and Relearning.

Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)

Doors, Hood and Trunk|Hood > < Components|Page 8514