Sequoia 4WD V8-5.7L (3UR-FE) (2009)
Trunk / Liftgate Lock: Service and Repair
Removal
DOOR LOCK: BACK DOOR LOCK: REMOVAL
REMOVAL
1. REMOVE POWER BACK DOOR ROD (w/ Power Back Door) See: Service and Repair/Disassembly
2. REMOVE BACK DOOR CENTER GARNISH See: Service and Repair/Disassembly
3. REMOVE BACK DOOR SIDE GARNISH RH See: Service and Repair/Disassembly
4. REMOVE BACK DOOR SIDE GARNISH LH See: Service and Repair/Disassembly
5. REMOVE BACK DOOR STRAP COVER See: Service and Repair/Disassembly
6. REMOVE BACK DOOR PULL STRAP See: Service and Repair/Disassembly
7. REMOVE BACK DOOR TRIM BOARD ASSEMBLY See: Service and Repair/Disassembly
8. REMOVE BACK DOOR SERVICE HOLE COVER See: Service and Repair/Disassembly
9. REMOVE BACK DOOR LOCK PROTECTOR See: Service and Repair/Disassembly
10. REMOVE BACK DOOR LOCK (w/o Power Back Door)
(a) Disconnect the connector.
(b) Disengage the clamp.
(c) Remove the 3 bolts and back door lock.
11. REMOVE BACK DOOR LOCK (w/ Power Back Door)
(a) Disconnect the connector.
(b) Disengage the clamp.
(c) Remove the 4 bolts and back door lock.