Sequoia 4WD V8-5.7L (3UR-FE) (2009)
(c) Remove the 2 bolts.
(d) Disengage the 5 clips and the 2 claws, and remove the scuff plate rear side.
21. REMOVE REAR DOOR SCUFF PLATE LH
HINT: Use the same procedure for both sides.
22. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH
(a) Remove the rear door opening weatherstrip.
23. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH
HINT: Use the same procedure for both sides.
24. REMOVE FRONT PILLAR GARNISH RH
(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the 2 assist grip plugs.
(b) Remove the 2 bolts and assist grip.
(c) Detach the claw and remove the front pillar garnish.