Sequoia 4WD V8-5.7L (3UR-FE) (2009)
/Page-2712002.png)
If the result is not as specified, replace the outer mirror switch.
2. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/ Retract Mirror)
(a) Inspect the outer mirror switch.
(1) Select "L" on the left/right adjustment switch.
(2) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the outer mirror switch.
(3) Select "R" on the left/right adjustment switch.
(4) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
