Sequoia 4WD V8-5.7L (3UR-FE) (2009)
/Page-2712003.png)
If the result is not as specified, replace the outer mirror switch.
(b) Inspect the retract switch.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the outer mirror switch.
3. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/ Memory)
(a) Inspect the outer mirror switch.
(1) Select "L" on the left/right adjustment switch.
(2) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
