Sequoia 4WD V8-5.7L (3UR-FE) (2009)
6. REMOVE FRONT SEAT CUSHION SHIELD LH See: Service and Repair/Front Seat Assembly (for Manual Seat)/Disassembly
7. REMOVE FRONT SEAT CUSHION SHIELD INNER LH See: Service and Repair/Front Seat Assembly (for Manual Seat)/Disassembly
8. REMOVE FRONT SEAT HEADREST ASSEMBLY
9. REMOVE FRONT SEAT HEADREST SUPPORT See: Service and Repair/Front Seat Assembly (for Manual Seat)/Disassembly
10. REMOVE SEATBACK COVER WITH PAD See: Service and Repair/Front Seat Assembly (for Manual Seat)/Disassembly
11. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY LH
(a) Remove the 2 springs.
(b) Disengage 6 hooks and remove the seatback spring.
(c) Disconnect the lumbar support adjuster connector.
(d) Remove the 2 screws and lumbar support adjuster assembly.
(e) Disengage 3 claws and remove the bush from the seat frame.
Installation
SEAT: LUMBAR SUPPORT ADJUSTER ASSEMBLY (for Manual Seat): INSTALLATION
INSTALLATION
CAUTION: Wear protective gloves. Sharp areas on the parts may injure your hands.
1. INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY LH
(a) Engage the 3 claws and install the bush.