toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Rear Seat Cushion Heater|Page 9248 > < Rear Seat Cushion Heater|Page 9246
Page 3
background image

2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB LH See: Service and Repair/Front Seat Assembly (for Power

Seat)/Disassembly

3. REMOVE RECLINING POWER SEAT SWITCH KNOB LH See: Service and Repair/Front Seat Assembly (for Power Seat)/Disassembly
4. REMOVE FRONT SEAT CUSHION SHIELD LH See: Service and Repair/Front Seat Assembly (for Power Seat)/Disassembly
5. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Front Seat

Inner Belt Assembly/Removal

6. REMOVE FRONT SEAT CUSHION SHIELD INNER LH See: Service and Repair/Front Seat Assembly (for Power Seat)/Disassembly
7. REMOVE FRONT POWER SEAT SWITCH LH See: Service and Repair/Front Seat Assembly (for Power Seat)/Disassembly
8. REMOVE SEAT CUSHION COVER WITH PAD (w/ Leg Support Adjustment Switch) See: Service and Repair/Front Seat Assembly (for Power

Seat)/Disassembly

9. REMOVE SEAT CUSHION COVER WITH PAD (w/o Leg Support Adjustment Switch) See: Service and Repair/Front Seat Assembly (for

Power Seat)/Disassembly

10. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER (w/ Leg Support Adjustment Switch) See: Service and Repair/Front Seat

Assembly (for Power Seat)/Disassembly

11. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER (w/o Leg Support Adjustment Switch) See: Service and Repair/Front Seat

Assembly (for Power Seat)/Disassembly

12. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY LH

(a) Cut off the 30 tack pins which fasten the seat heater to the seat cushion cover, and then remove the seat cushion heater from the seat cushion

cover.

Installation

SEAT: FRONT SEAT CUSHION HEATER: INSTALLATION

INSTALLATION

CAUTION:  Wear protective gloves. Sharp areas on the parts may injure your hands.

HINT:
-

Use the same procedure for the LH side and RH side.

-

The procedure listed below is for the LH side.

1. INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY LH

(a) Set the seat cushion heater with the name stamp side facing the seat cushion cover.
(b) Install the seat cushion heater with new 30 tack pins.

Rear Seat Cushion Heater|Page 9248 > < Rear Seat Cushion Heater|Page 9246