Sequoia 4WD V8-5.7L (3UR-FE) (2009)
2. INSPECT SEAT HEATER SWITCH RH
(a) Check the resistance.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the switch.
(b) Check the illumination operation.
(1) Apply battery voltage to the switch connector, and check that the seat heater switch illuminates.
OK:
If the result is not as specified, replace the switch.
(c) Check the indicator operation.
(1) Apply battery voltage to the switch connector, and check that the seat heater switch illuminates.
OK:
If the result is not as specified, replace the switch.