Sequoia 4WD V8-5.7L (3UR-FE) (2009)
(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 3 claws and the guides and remove the quarter trim cover LH.
(b) Disconnect the 2 connectors.
8. REMOVE FOLD SEAT SWITCH ASSEMBLY (for Luggage Compartment RH Seat)
(a) Disengage the 2 claws and remove the fold seat switch assembly.
9. REMOVE FOLD SEAT SWITCH ASSEMBLY (for Luggage Compartment LH Seat)
(a) Disengage the 2 claws and remove the fold seat switch assembly.
Installation
SEAT: POWER SEAT SWITCH (for Rear No. 2 Seat): INSTALLATION
INSTALLATION
1. INSTALL FOLD SEAT SWITCH ASSEMBLY (for Luggage Compartment RH Seat)
(a) Engage the 2 claws and install the fold seat switch assembly.
2. INSTALL FOLD SEAT SWITCH ASSEMBLY (for Luggage Compartment LH Seat)