Sequoia 4WD V8-5.7L (3UR-FE) (2009)
/Page-2865002.png)
DOOR / HATCH: POWER BACK DOOR MAIN SWITCH: REMOVAL
REMOVAL
1. REMOVE NO. 1 SWITCH HOLE BASE
(a) Using a moulding remover, disengage the 6 claws and remove the No. 1 switch hole base.
2. REMOVE POWER BACK DOOR MAIN SWITCH
(a) Engage the 2 claws and remove the power back door main switch.
(b) Disconnect the connector.
Installation
DOOR / HATCH: POWER BACK DOOR MAIN SWITCH: INSTALLATION
INSTALLATION
1. INSTALL POWER BACK DOOR MAIN SWITCH
(a) Connect the connector.
(b) Engage the 2 claws and install the power back door main switch.
2. INSTALL NO. 1 SWITCH HOLE BASE
(a) Engage the 6 claws and install the No. 1 switch hole base.
