Sequoia 4WD V8-5.7L (3UR-FE) (2009)
Brake Pedal Assy: Service and Repair
Installation
BRAKE SYSTEM (OTHER): BRAKE PEDAL: INSTALLATION
INSTALLATION
1. INSTALL BRAKE PEDAL PAD
(a) Install the brake pedal pad onto the brake pedal.
2. INSTALL BRAKE PEDAL SUPPORT SUB-ASSEMBLY
(a) Install the brake pedal support with the 4 nuts.
Torque: 15 Nm (155 kgf-cm, 11 ft-lbf)
(b) Install the No. 3 brake pedal bracket to the brake pedal support.
(c) Temporarily install the brake pedal support, No. 3 brake pedal bracket and brake pedal lever with the bolt and nut.
(d) Install the bolt to the No. 3 brake pedal bracket.
Torque: 18 Nm (184 kgf-cm, 13 ft-lbf)
(e) Apply lithium soap base glycol grease to the inner surface of the hole on the brake pedal and return spring mounting bracket of the No. 3 brake
pedal bracket.
(f) Install the brake pedal return spring.
(g) Tighten the bolt and nut.
Torque: 23 Nm (239 kgf-cm, 17 ft-lbf)
3. INSTALL PUSH ROD PIN