Sequoia 4WD V8-5.7L (3UR-FE) (2009)
/Page-1678001.png)
Parking Brake Warning Switch: Testing and Inspection
PARKING BRAKE: PARKING BRAKE SWITCH: ON-VEHICLE INSPECTION
ON-VEHICLE INSPECTION
1. REMOVE PARKING BRAKE SWITCH ASSEMBLY See: Parking Brake Pedal/Service and Repair/Overhaul/Disassembly
2. CHECK PARKING BRAKE SWITCH ASSEMBLY
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the parking brake switch assembly.
3. INSTALL PARKING BRAKE SWITCH ASSEMBLY See: Parking Brake Pedal/Service and Repair/Overhaul/Reassembly
