Sequoia 4WD V8-5.7L (3UR-FE) (2009)
Cruise Control Module: Service and Repair
Removal
CRUISE CONTROL: DISTANCE CONTROL ECU: REMOVAL
REMOVAL
1. REMOVE FRONT DOOR SCUFF PLATE LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
2. REMOVE COWL SIDE TRIM BOARD LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
3. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP LH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal
4. REMOVE INSTRUMENT SIDE PANEL LH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal
5. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Hood/Hood Latch Release
Cable/Service and Repair/Removal
6. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Dashboard
/ Instrument Panel/Service and Repair/Removal
7. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD INSERT See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal
8. SEPARATE MAIN BODY ECU (COWL SIDE JUNCTION BLOCK LH) See: Heating and Air Conditioning/Housing Assembly HVAC/Service
and Repair/Front Air Conditioning Unit/Removal
9. REMOVE DISTANCE CONTROL ECU ASSEMBLY
(a) Disconnect the connector.
(b) Remove the bolt and the distance control ECU.