Sequoia 4WD V8-5.7L (3UR-FE) (2009)
/Page-878003.png)
7. REMOVE INLET RADIATOR HOSE
(a) Remove the inlet radiator hose.
8. DISCONNECT OUTLET RADIATOR HOSE
(a) Disconnect the outlet radiator hose from the water inlet housing.
9. REMOVE FAN SHROUD (w/ Trailer Towing System)
(a) Loosen the 4 nuts holding the fluid coupling and fan.
(b) Remove the fan and generator V belt See: Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Removal.
(c) Detach the claw to open the No. 1 flexible hose clamp.
