Sequoia 4WD V8-5.7L (3UR-FE) (2009)
Water Pump: Service and Repair
Installation
3UR-FE COOLING: WATER PUMP: INSTALLATION
INSTALLATION
1. INSTALL WATER PUMP ASSEMBLY
(a) Install a new gasket and the water pump with the 8 bolts shown in the illustration.
-
Bolt A
Torque: 47 Nm (479 kgf-cm, 35 ft-lbf)
-
Bolt B
Torque: 23 Nm (235 kgf-cm, 17 ft-lbf)
-
Bolt C
Torque: 20 Nm (204 kgf-cm, 16 ft-lbf)
2. INSTALL WATER PUMP PULLEY
(a) Temporarily install the pulley with the 4 bolts.
(b) Using SST, hold the pulley and tighten the 4 bolts.
SST: 09960-10010
09962-01000
09963-01000
Torque: 21 Nm (214 kgf-cm, 16 ft-lbf)
3. INSTALL INLET WATER HOUSING
(a) Install a new gasket to the water pump.