Sequoia 4WD V8-5.7L (3UR-FE) (2009)
/Page-798004.png)
(a) Remove the 5 nuts and oil cooler from the oil filter bracket.
(b) Remove the 2 O-rings.
11. REMOVE OIL COOLER SPACER
(a) Remove the bolt and oil cooler spacer from the oil filter bracket.
(b) Remove the gasket.
Installation
3UR-FE LUBRICATION: ENGINE OIL COOLER: INSTALLATION
INSTALLATION
1. INSTALL OIL COOLER SPACER
