Sequoia 4WD V8-5.7L (3UR-FE) (2009)
/Page-818004.png)
(e) Connect the 3 wire clamps to the 3 wire harness clamp brackets.
(f) Connect the No. 1 tube and install it to the intake manifold with the 2 bolts.
Torque: 8.2 Nm (84 kgf-cm, 73 in-lbf)
(g) Connect the purge VSV connector.
(h) Connect the purge line hose to the No. 1 vacuum switching valve assembly.
(i) Connect the vacuum switching valve connector (for ACIS).
(j) Connect the ventilation hose.
(k) Connect the 2 water by-pass hoses.
(l) Connect the throttle W/ motor body connector.
