Sequoia 4WD V8-5.7L (3UR-FE) (2009)
Manual Seat Type RH Side)/Removal
8. REMOVE SEAT TRACK BRACKET FRONT COVER INNER See: Body and Frame/Seats/Service and Repair/Rear No. 2 Seat Assembly (for
Manual Seat Type RH Side)/Removal
9. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (for Power Seat) See: Body and Frame/Seats/Service and Repair/Rear No. 2 Seat Assembly (for
Power Seat Type RH Side)/Removal
10. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (for Manual Seat) See: Body and Frame/Seats/Service and Repair/Rear No. 2 Seat Assembly
(for Manual Seat Type RH Side)/Removal
11. REMOVE REAR SEAT CUSHION HINGE LOWER COVER RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
12. REMOVE REAR FLOOR STEP NO. 1 COVER See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
13. REMOVE REAR FLOOR STEP NO. 2 COVER See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
14. REMOVE REAR DOOR SCUFF PLATE RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
15. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
16. REMOVE ROPE HOOK ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
17. REMOVE REAR FLOOR MAT SUPPORT PLATE See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
18. REMOVE QUARTER TRIM PANEL ASSEMBLY RH (for Standard) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
19. REMOVE QUARTER TRIM PANEL ASSEMBLY RH (for Power Seat) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
20. REMOVE BLOWER MOTOR CONTROL
(a) Disconnect the connector.
(b) Remove the 2 screws and the blower motor control.
Installation
HEATING / AIR CONDITIONING: BLOWER MOTOR CONTROLLER (for Rear Side): INSTALLATION
INSTALLATION
1. INSTALL BLOWER MOTOR CONTROL
(a) Install the blower motor control with the 2 screws.
(b) Connect the connector.
2. INSTALL QUARTER TRIM PANEL ASSEMBLY RH (for Standard) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
3. INSTALL QUARTER TRIM PANEL ASSEMBLY RH (for Power Seat) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
4. INSTALL REAR FLOOR MAT SUPPORT PLATE See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
5. INSTALL ROPE HOOK ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
6. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
7. INSTALL REAR DOOR SCUFF PLATE RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
8. INSTALL REAR FLOOR STEP NO. 1 COVER See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
9. INSTALL REAR FLOOR STEP NO. 2 COVER See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
10. INSTALL REAR SEAT CUSHION HINGE LOWER COVER RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation