Sequoia 4WD V8-5.7L (3UR-FE) (2009)
(a) Remove the evaporator from the blower case.
7. REMOVE EVAPORATOR TEMPERATURE SENSOR
(a) Remove the sensor.
Installation
HEATING / AIR CONDITIONING: FRONT EVAPORATOR TEMPERATURE SENSOR: INSTALLATION
INSTALLATION
1. INSTALL EVAPORATOR TEMPERATURE SENSOR
NOTE: If reusing the evaporator, do not insert the sensor into a location where the sensor was previously inserted.
(a) Insert the sensor to a location that is 1 fin to the right or left of its previous location.
Standard