Sequoia 4WD V8-5.7L (3UR-FE) (2009)
/Page-2254015.png)
(a) Remove the 4 screws and the bracket.
(b) Using pliers, grip the claws of the 2 clips and side the clips to remove the water pipe.
5. REMOVE HEATER INLET WATER HOSE
(a) Disengage the claw and separate the clamp.
(b) Using pliers, grip the claws of the clip and slide the clips to disconnect the heater water hose.
6. REMOVE HEATER OUTLET WATER HOSE
(a) Using pliers, grip the claws of the clip and slide the clips to disconnect the heater water hose.
7. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY
(a) Remove the screw.
(b) Disengage the claw and remove the heater clamp.
