Sequoia 4WD V8-5.7L (3UR-FE) (2009)
/Page-2255034.png)
(d) Install the plate with the 3 screws.
(e) Engage the clamp.
(f) Install a new packing, as shown in the illustration.
6. INSTALL COOLING UNIT DAMPER SERVO SUB-ASSEMBLY
(a) Install the damper servo with the 3 screws, as shown in the illustration.
(b) Connect the connector.
7. INSTALL BLOWER DAMPER SERVO SUB-ASSEMBLY
(a) Install the damper servo with the 3 screws.
(b) Connect the connector.
