Sequoia 4WD V8-5.7L (3UR-FE) (2009)
8. INSTALL DAMPER SERVO SUB-ASSEMBLY
(a) Install the damper servo with the 3 screws.
(b) Connect the connector.
9. INSTALL DAMPER SERVO SUB-ASSEMBLY
(a) Set the damper servo so that the cutout part engages with the tooth of the gear, and attach the claw to install the damper servo.
(b) Install the 4 screws and connect the 2 connectors.
10. INSTALL AIR DUCT
(a) Install the duct with the 2 screws.