Sequoia 4WD V8-5.7L (3UR-FE) (2009)
Manual Seat Type RH Side)/Removal
8. REMOVE SEAT TRACK BRACKET FRONT COVER INNER See: Body and Frame/Seats/Service and Repair/Rear No. 2 Seat Assembly (for
Manual Seat Type RH Side)/Removal
9. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (for Power Seat) See: Body and Frame/Seats/Service and Repair/Rear No. 2 Seat Assembly (for
Power Seat Type RH Side)/Removal
10. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (for Manual Seat) See: Body and Frame/Seats/Service and Repair/Rear No. 2 Seat Assembly
(for Manual Seat Type RH Side)/Removal
11. REMOVE REAR SEAT CUSHION HINGE LOWER COVER RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
12. REMOVE REAR FLOOR STEP NO. 1 COVER See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
13. REMOVE REAR FLOOR STEP NO. 2 COVER See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
14. REMOVE REAR DOOR SCUFF PLATE RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
15. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
16. REMOVE ROPE HOOK ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
17. REMOVE REAR FLOOR MAT SUPPORT PLATE See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
18. REMOVE QUARTER TRIM PANEL ASSEMBLY RH (for Standard) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
19. REMOVE QUARTER TRIM PANEL ASSEMBLY RH (for Power Seat) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
20. REMOVE REAR WINDOW NO. 2 SIDE GARNISH ASSEMBLY RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
21. REMOVE REAR SIDE NO. 2 AIR DUCT See: Housing Assembly HVAC/Service and Repair/Rear Air Conditioning Unit/Removal
22. REMOVE QUARTER TRIM BRACKET RH See: Housing Assembly HVAC/Service and Repair/Rear Air Conditioning Unit/Removal
23. REMOVE COVER SUB-ASSEMBLY See: Housing Assembly HVAC/Service and Repair/Rear Air Conditioning Unit/Removal
24. REMOVE REAR SIDE NO. 1 AIR DUCT See: Housing Assembly HVAC/Service and Repair/Rear Air Conditioning Unit/Removal
25. REMOVE REAR EVAPORATOR TEMPERATURE SENSOR (NO. 2 AIR CONDITIONING HARNESS ASSEMBLY)
(a) Disconnect the 2 connectors.
(b) Disengage the clamp, claw and the sensor.
Installation
HEATING / AIR CONDITIONING: REAR EVAPORATOR TEMPERATURE SENSOR: INSTALLATION
INSTALLATION
1. INSTALL REAR EVAPORATOR TEMPERATURE SENSOR (NO. 2 AIR CONDITIONING HARNESS ASSEMBLY)
(a) Engage the clamp, claw and install the sensor.
(b) Connect the 2 connectors.
2. INSTALL REAR SIDE NO. 1 AIR DUCT See: Housing Assembly HVAC/Service and Repair/Rear Air Conditioning Unit/Installation
3. INSTALL COVER SUB-ASSEMBLY See: Housing Assembly HVAC/Service and Repair/Rear Air Conditioning Unit/Installation
4. INSTALL QUARTER TRIM BRACKET RH See: Housing Assembly HVAC/Service and Repair/Rear Air Conditioning Unit/Installation
5. INSTALL REAR SIDE NO. 2 AIR DUCT See: Housing Assembly HVAC/Service and Repair/Rear Air Conditioning Unit/Installation
6. INSTALL REAR WINDOW NO. 2 SIDE GARNISH ASSEMBLY RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
7. INSTALL QUARTER TRIM PANEL ASSEMBLY RH (for Standard) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and