Sequoia 4WD V8-5.7L (3UR-FE) (2009)
Glove Box Lamp: Service and Repair
Removal
LIGHTING (INT): GLOVE BOX LIGHT: REMOVAL
REMOVAL
1. REMOVE FRONT DOOR SCUFF PLATE RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
2. REMOVE COWL SIDE TRIM BOARD RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
3. REMOVE INSTRUMENT SIDE PANEL RH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal
4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal
5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH See: Body and Frame/Interior Moulding / Trim/Dashboard
/ Instrument Panel/Service and Repair/Removal
6. REMOVE GLOVE BOX LIGHT ASSEMBLY
(a) Disengage the 2 claws and remove the glove box light.
(b) Disconnect the connector.
7. REMOVE GLOVE BOX BULB
(a) Remove the glove box bulb.