Sequoia 4WD V8-5.7L (3UR-FE) (2009)
License Plate Lamp: Service and Repair
Removal
LIGHTING (EXT): LICENSE PLATE LIGHT ASSEMBLY: REMOVAL
REMOVAL
1. REMOVE BACK DOOR CENTER GARNISH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Disassembly
2. REMOVE BACK DOOR SIDE GARNISH RH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Disassembly
3. REMOVE BACK DOOR SIDE GARNISH LH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Disassembly
4. REMOVE BACK DOOR STRAP COVER See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Disassembly
5. REMOVE BACK DOOR PULL STRAP See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Disassembly
6. REMOVE BACK DOOR TRIM BOARD ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Disassembly
7. REMOVE BACK DOOR SERVICE HOLE COVER See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Disassembly
8. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
9. REMOVE REAR TELEVISION CAMERA ASSEMBLY See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist
Systems/Rear Vision Camera/Service and Repair/Removal
10. REMOVE LICENSE PLATE LIGHT ASSEMBLY
(a) Remove the 4 screws.
(b) Disconnect the 4 harness clamps and remove the license plate light.
11. REMOVE LICENSE PLATE LIGHT BULB
(a) Remove the license plate light bulb from the light socket.