Sequoia 4WD V8-5.7L (3UR-FE) (2009)
/Page-3171001.png)
Turn Signal Flasher: Testing and Inspection
LIGHTING (EXT): TURN SIGNAL FLASHER ASSEMBLY: ON-VEHICLE INSPECTION
ON-VEHICLE INSPECTION
1. INSPECT TURN SIGNAL FLASHER ASSEMBLY
(a) Check the power source circuit and ground circuit.
(1) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
(2) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(b) Check the output operation signal.
(1) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
