Sequoia 4WD V8-5.7L (3UR-FE) (2009)
/Page-3175001.png)
Turn Signal Lamp: Testing and Inspection
LIGHTING (EXT): SIDE TURN SIGNAL LIGHT ASSEMBLY: INSPECTION
INSPECTION
1. INSPECT OUTER REAR VIEW MIRROR SUB-ASSEMBLY LH
(a) Check the door mirror turn indicator.
(1) Apply battery voltage to the terminals of the connector, and check the LED illumination condition.
OK:
If the result is not as specified, replace the mirror assembly.
2. INSPECT OUTER REAR VIEW MIRROR SUB-ASSEMBLY RH
(a) Check the door mirror turn indicator.
(1) Apply battery voltage to the terminals of the connector, and check the LED illumination condition.
OK:
