Sequoia 4WD V8-5.7L (3UR-FE) (2009)
(a) Set the brake fluid can upside down on the reservoir.
Fluid:
SAE J1703 or FMVSS No. 116 DOT3
NOTE:
-
Make sure there is sufficient brake fluid in the can.
-
After adding brake fluid, make sure the reservoir is sufficiently full.
7. BLEED AIR FROM BRAKE MASTER CYLINDER
HINT: If the master cylinder has been disassembled or if the reservoir becomes empty, bleed air from the master cylinder.
(a) Using a union nut wrench, disconnect the 2 brake lines from the master cylinder.
(b) Slowly depress and hold the brake pedal.
(c) Block the outer holes with your fingers, and release the pedal.