Sequoia 4WD V8-5.7L (3UR-FE) (2009)
(a) Remove the rear No. 2 seat assembly RH See: Body and Frame/Seats/Service and Repair/Rear No. 2 Seat Assembly (for Manual Seat Type
RH Side)/Removal.
8. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (for Power Seat)
(a) Remove the rear No. 2 seat assembly RH See: Body and Frame/Seats/Service and Repair/Rear No. 2 Seat Assembly (for Power Seat Type RH
Side)/Removal.
9. REMOVE REAR SEAT CUSHION HINGE LOWER COVER RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
10. REMOVE REAR FLOOR STEP NO. 1 COVER See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
11. REMOVE REAR FLOOR STEP NO. 2 COVER See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
12. REMOVE REAR DOOR SCUFF PLATE RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
13. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
14. REMOVE ROPE HOOK ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
15. REMOVE REAR FLOOR MAT SUPPORT PLATE See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
16. REMOVE QUARTER TRIM PANEL ASSEMBLY RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
17. REMOVE QUARTER TRIM PANEL ASSEMBLY RH (for Power Seat) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
18. REMOVE POWER OUTLET SOCKET ASSEMBLY
(a) Using a screwdriver with its tip wrapped in protective tape, disengage the claws and remove the power outlet socket assembly.
19. REMOVE POWER OUTLET SOCKET COVER
(a) Disengage the 2 claws and remove the power outlet socket cover.
Installation
POWER OUTLETS (INT): REAR POWER OUTLET SOCKET: INSTALLATION
INSTALLATION
1. INSTALL POWER OUTLET SOCKET COVER
(a) Engage the 2 claws and install the power outlet socket cover.
2. INSTALL POWER OUTLET SOCKET ASSEMBLY