Sequoia 4WD V8-5.7L (3UR-FE) (2009)
/Page-1093081.png)
(a) Disconnect the H37 combination meter ECU connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- REPAIR OR REPLACE CAN MAIN WIRE CONNECTED TO COMBINATION METER ECU (CANH, CANL)
OK -- REPLACE COMBINATION METER ASSEMBLY
30. CHECK FOR SHORT TO GND IN CAN BUS WIRE (POWER STEERING ECU)
(a) Disconnect the H38 power steering ECU connector.
