Sequoia 4WD V8-5.7L (3UR-FE) (2009)
/Page-1093085.png)
(a) Disconnect the H56 center airbag sensor connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- REPAIR OR REPLACE CAN BRANCH WIRE CONNECTED TO CENTER AIRBAG SENSOR (CANH, CANL)
OK -- REPLACE CENTER AIRBAG SENSOR
Main Body ECU Communication Stop Mode
NETWORKING: CAN COMMUNICATION SYSTEM: Main Body ECU Communication Stop Mode
Main Body ECU Communication Stop Mode
DESCRIPTION
WIRING DIAGRAM
