toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3350 > < Initial Inspection and Diagnostic Overview|Page 3348
Page 6
background image

HINT:
-

DTC communication uses the CAN communication system.

-

Distance control ECU data is also output.

-

*1: For vehicle with 2UZ-FE only. The ECM is malfunctioning if U0101 is output. Replace the ECM.

-

*2: If U0123, U0235 or U1102 is output alone, the CAN bus is normal  See: Testing and Inspection/Diagnostic Trouble Code Tests and
Associated Procedures/U Code Charts/U0123for U0123,  See: Testing and Inspection/Diagnostic Trouble Code Tests and Associated
Procedures/U Code Charts/U0235 for U0235 and U1102).

-

*3: Dynamic laser cruise DTC.

(d) SKID CONTROL ECU

HINT:  DTC communication uses the CAN communication system.

(e) COMBINATION METER ECU

HINT:  DTC communication uses the CAN communication system.

(f) AIR CONDITIONING AMPLIFIER

HINT:  DTC communication uses the CAN communication system.

(g) SUSPENSION CONTROL ECU

For Vehicle with air suspension system only.

HINT:  DTC communication uses the CAN communication system.

Initial Inspection and Diagnostic Overview|Page 3350 > < Initial Inspection and Diagnostic Overview|Page 3348