Sequoia 4WD V8-5.7L (3UR-FE) (2009)
NETWORKING: CAN COMMUNICATION SYSTEM: Center Airbag Sensor Communication Stop Mode
Center Airbag Sensor Communication Stop Mode
DESCRIPTION
WIRING DIAGRAM
INSPECTION PROCEDURE
HINT: Operating the ignition switch, any switches or any doors triggers related ECU and sensor communication with the CAN, which causes
resistance variation.
PROCEDURE
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
(a) Disconnect the cable from the negative (-) battery terminal before measuring the resistances of the main wire and the branch wire.
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NEXT -- Continue to next step.
2. CHECK FOR OPEN IN CAN BUS WIRE (CENTER AIRBAG SENSOR BRANCH WIRE)