Sequoia 4WD V8-5.7L (3UR-FE) (2009)
/Page-1094074.png)
(a) Disconnect the O41 No. 4 junction connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- CHECK FOR SHORT TO B+ IN CAN BUS WIRE (COMBINATION METER ECU)
OK -- REPAIR OR REPLACE NO. 4 JUNCTION CONNECTOR
20. CHECK FOR SHORT TO B+ IN CAN BUS WIRE (NO. 1 JUNCTION CONNECTOR - NO. 4 JUNCTION CONNECTOR)
(a) Disconnect the H91 No. 1 junction connector.
(b) Measure the resistance according to the value(s) in the table below.
