Sequoia 4WD V8-5.7L (3UR-FE) (2009)
(a) Disconnect the H94 No. 1 junction connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- CHECK FOR SHORT TO B+ IN CAN BUS WIRE (STEERING ANGLE SENSOR)
OK -- Continue to next step.
27. CHECK FOR SHORT TO B+ IN CAN BUS WIRE (NO. 1 JUNCTION CONNECTOR - CENTER AIRBAG SENSOR)
(a) Disconnect the H90 No. 1 junction connector.
(b) Measure the resistance according to the value(s) in the table below.